OEM & ODM Engineering Portfolio

Custom Battery Packs Built for Real Operating Loads

Six custom battery architectures engineered for US, UK, European, and ANZ equipment makers. Client names stay confidential under NDA, while all electrical parameters, CAD layouts, and test records come directly from our engineering builds.

3D CAD Cutaway Architecture 51.2V 230Ah LFP
3D CAD cutaway of a custom 51.2V 230Ah prismatic LiFePO4 battery pack enclosure with internal busbars and BMS heatsink
30+ Months
Continuous multi-SKU OEM supply to a U.S. marine brand
200A Pulse
High-rate AGV & robotics packs verified under load
12V to 64.8V
LFP, NMC, and sodium-ion packs engineered to spec
100% EOL
Serialized capacity, load, and cutoff logs per unit
3D Cutaway Render 16V 135Ah · 5S9P LFP
3D cutaway rendering of custom 16V 135Ah 5S9P marine LiFePO4 battery pack with cylindrical cells, copper busbars, and BMS
Platforms
12.8V, 16V (5S), 24V, 36V
Featured Build
16V 135Ah (5S9P 32140)
Valutazione attuale
100A Cont. / 200A OCP
Cell Compliance
UL1642 & UL1973
Caso 01 · Multi-SKU OEM Supply · United States

30+ Months of Continuous Multi-SKU OEM Production, Including Non-Standard 16V Marine Packs

Challenge

A U.S. marine lithium brand needed one factory for both standard private-label SKUs and a non-standard 16V (5S LFP) pack for marine electronics. Larger factories turned away the 16V build because it sat outside standard 12V and 24V lines.

Ingegneria & Produzione

We built a 5S9P 16V 135Ah pack (12V to 18.2V window) with UL-recognized 32140 LFP cells alongside their 12.8V, 24V, and 36V lineup. Incoming cell lots pass capacity and IR grading prior to welding, and serialized batch records tie every pack to its cell lot, BMS batch, and EOL test sheet.

Delivery Record

Moved from sample sign-off in April 2023 to a 175-pack initial batch in May 2023, followed by over 30 consecutive months of repeat shipments.

Explore Marine Battery Packs →
Mechanical CAD Drawing 680 × 185 × 76 mm
Mechanical CAD drawing of 25.6V 75Ah low-profile AGV and robotics LiFePO4 battery pack with Anderson 170A connector
Architecture
25.6V 75Ah (8S5P 32140)
Load Profile
150A Cont. / 200A (3s)
Protezione
250A OCP / 20V to 29.2V
Interface
6 AWG + Anderson 170A
Caso 02 · High-Rate Discharge · AGV & Mobile Robotics

25.6V 75Ah Low-Profile AGV & Robotics Pack Verified for 150A Continuous and 200A Pulse Loads

Challenge

Warehouse AGVs and mobile robots draw sharp current spikes during acceleration and heavy lifting. Standard 1C LFP packs suffer voltage sag under 2C to 3C pulses, causing BMS trips and mid-shift controller reboots inside tight chassis bays.

Ingegneria & Validazione

We engineered a slim 76mm-tall 8S5P 32140 LFP pack using low-impedance busbars, 6 AWG power leads, and an Anderson 170A interface with dedicated communication wiring. The BMS curve was tuned for 150A continuous load, 200A 3-second peaks, and a 250A over-current cutoff paired with a matched 29.2V charger.

150A Continuous Load Tested 200A 3s Pulse Sag Verified 250A OCP Cutoff Logged Serialized EOL Sheet

Outcome

Held stable bus voltage across repeated high-current starts without increasing pack footprint or adding external capacitor banks.

Explore AGV & Batterie per robot mobili →
Sealed Industrial Enclosure 12V 50Ah · Na-Ion
Matte-black sealed 12V 50Ah sodium-ion battery pack enclosure for sub-zero European outdoor equipment
Architecture
12V 50Ah (4S5P NaCR33140)
Valutazione attuale
30A Dis. / 60A OCP / 25A Chg
Voltage Window
8.0V to 15.6V
Thermal Design
No Heaters / 0V Safe Storage
Caso 03 · Extreme Cold Climate · Sodium-Ion

12V 50Ah Sodium-Ion Pack Built for Sub-Zero Operation Without Internal Heating Pads

Challenge

Standard LiFePO4 packs cannot charge below 0°C without lithium plating risk. In Alpine and Nordic equipment, internal heating pads drain usable energy before work starts and add relays and thermistors that can fail in winter field service.

Engineering Solution

We built a 4S5P 12V 50Ah sodium-ion pack using NaCR33140 cells backed by cell-level cold-temperature test reports. Because sodium-ion handles sub-zero charging across an 8.0V to 15.6V window, the pack runs without resistive heaters and tolerates zero-volt storage safely.

Outcome

Gave European outdoor and remote power equipment builders a simpler cold-climate drop-in option with higher net winter runtime.

Explore Cold Climate Solutions →
Dimensional CAD Layout 417 × 237 × 78 mm
CAD dimensional drawing of 64.8V 50Ah 18S10P Samsung 21700 high-density NMC UAV battery pack
Architecture
64.8V 50Ah (18S10P 21700)
Total Energy
3.24 kWh (45.0V to 75.6V)
Rate Rating
60A Flight / 50A (1C) Charge
Messa a fuoco
High Wh/kg & Group Balance
Caso 04 · Alta densità di energia · Commercial UAV

64.8V 50Ah (3.24 kWh) High-Density NMC Pack for Heavy-Lift Commercial Drones

Challenge

Heavy-payload UAVs need a 64.8V bus to cut motor current and harness weight, plus 1C fast charging between flights. Any cell mismatch inside an 18S10P stack shortens flight endurance and creates hot spots during rapid turnaround charging.

Engineering Solution

We assembled an 18S10P pack (417 x 237 x 78 mm) from Samsung 21700 5000mAh NMC cells tightly sorted by OCV and internal resistance. Interconnect paths were balanced across all 18 series groups to sustain 60A flight loads and 50A fast charging.

Outcome

Delivered 3.24 kWh in a compact high-voltage architecture built for long-endurance aerial survey and industrial UAS platforms.

Explore Drone & Batterie per droni →
Custom L-Shape CAD 198 × 77 × 22 mm
Custom L-shape CAD drawing of 46.8V 5Ah 13S1P EVE 21700 removable battery pack with integrated BMS placement
Architecture
46.8V 5Ah (13S1P EVE 21700)
Envelope
22mm Slim L-Shape Profile
Ratings
35.1V to 54.6V / 10A Cont.
Sicurezza
30A OCP / 65°C Thermal Cut
Case 05 · Tight Mechanical Envelope · United States

46.8V 5Ah Removable Pack Engineered Into a 22mm Slim L-Shape Cavity

Challenge

A U.S. hardware team developing a cordless commercial display needed a removable 46.8V pack inside an irregular 22mm-thick L-shape bay. Standard BMS boards and cell holders exceeded the clearance, and launch testing left no window for enclosure re-tooling.

Ingegneria & Delivery

We arranged 13S1P EVE 21700 5000mAh cells into the exact L-shape footprint and tucked the compact BMS into the shoulder clearance while keeping full electrical creepage margins and 65°C cutoff protection. Engineering samples and pilot batches shipped by dangerous-goods air express across consecutive months.

Outcome

Kept U.S. hardware validation on schedule with zero changes to the client’s outer chassis tooling.

Explore Custom Battery Engineering →
3D Enclosure CAD 51.2V 230Ah · 11.77 kWh
3D CAD model of heavy-duty 51.2V 230Ah prismatic LiFePO4 commercial battery enclosure with lifting eyebolts
Architecture
51.2V 230Ah (REPT Prismatic)
Conformità
UN38.3 & UL 2580 Cell Docs
In carica
25V-29V → 48V 1.2kW DC-DC
Quality Record
Serialized EOL Sheet / Unit
Case 06 · Commercial System · DC-DC Integration

51.2V 230Ah (11.77 kWh) Prismatic LFP System with Matched 1.2kW DC-DC Charging

Challenge

Commercial fleet and off-grid integrators frequently hit inrush trips when pairing high-capacity 51.2V LFP packs with vehicle DC-DC converters, alongside strict hazmat sea-freight inspections at destination ports.

Ingegneria & Delivery

We built a serviceable metal enclosure around REPT 230Ah prismatic cells with lifting eyebolts and front-access BMS terminals. Before shipment, we bench-matched the 1.2kW DC-DC charger to the pack BMS curve and issued serialized EOL capacity reports with complete UN38.3 ocean-freight documentation.

Outcome

Cleared customs without delay and entered commercial field service, extending a multi-year supply partnership from 2024 through 2026.

Explore Energy Storage Systems →

Have an Equipment Spec Ready? Send It to Our Engineering Team.

We work with US, European, UK, and ANZ equipment makers planning 100 to 5,000 packs per year, plus specialized industrial programs needing custom BMS tuning, IP68 protection, or UN38.3, IEC, and UL documentation. Mutual NDAs are signed within 2 hours.

Include These Details for an 8-Hour Feasibility Review

  • Target equipment and operating environment
  • Nominal voltage and capacity or runtime goal
  • Continuous and peak discharge current profile
  • Enclosure dimensions and IP rating target
  • Required certifications (UN38.3, IEC, UL) and annual volume

Richiedi un Preventivo Gratuito

Invia i dettagli dell'applicazione e confermeremo se questa configurazione soddisfa i tuoi requisiti di tensione, corrente, custodia e comunicazione. Risponderemo entro 8 ore lavorative; si prega di attendere un'e-mail da “@holobattery.com”.