Topleverancier van industriële lithiumbatterijen in China

Aangepaste 24V 90Ah lithium AGV-batterij

sectie sep wit

Deze 90 Ah-accu, voorzien van innovatieve lithium-iontechnologie, levert stabiel en betrouwbaar vermogen voor moeiteloos AGV-gebruik.

Extra informatie

Gewicht13.3 kg
Nominale spanning

25,2V

Capaciteit

90Ah

Energie

2.27 kWh

Type batterij

21700 batterijpakket

Maximale continue ontlaadstroom

90A (1C) (Peak 120A)

Laadstroom

18A

Afmetingen

302 x 185 x 155 mm

Oplaadtemperatuur

0~45°C

Ontladingstemperatuur

-20~60°C

Opslagtemperatuur

0~40°C

Productdetails

A 25.2V 90Ah LiFePO4 pack for AGVs, AMRs and mobile robotics, where duty cycles are continuous and charging downtime is expensive. It carries 2.27 kWh of usable energy and delivers 80A (Peak 120A) continuous, a 0.89C rating suited to mixed duty: sustained running with periodic higher demand.

Charging at 18A brings it to full in roughly 5.5 hours. The operating window is -20~60°C on discharge and 0~45°C on charge. The pack measures 302 x 185 x 155 mm and weighs 13.3 kg.

Waar het zich in het bereik bevindt

Within our 24V range this sits between the 60Ah and 100Ah builds. If your runtime target is tighter than expected once we model the duty cycle, the 100Ah configuration is the usual next step; if weight or envelope is the binding constraint, the 60Ah build is lighter.

Wat wij aanpassen

Capacity, envelope, connector and charging strategy — opportunity charging or shift swap — are set per project. BMS communication over CAN or RS485 reports state of charge to your robot controller, with Bluetooth for local diagnostics.

Veelgestelde vragen

How many cycles will it last in continuous duty?
That depends on depth of discharge and rate. Give us the duty cycle and we will give you a realistic figure rather than a headline one.

Kan het pakket de laadstatus doorgeven aan onze wagenparkbeheerder?
Ja. CAN en RS485 zijn standaard, en Bluetooth dekt lokale diagnostiek. Stuur ons uw protocol en wij brengen het in kaart vóór productie.

Cellen, compliance en levertijd

Cilindrische 21700 LFP-cellen van A-kwaliteit, doorgaans met UL-erkenning op celniveau. Elk pakket wordt geleverd met een UN38.3-testsamenvatting en MSDS, klaar voor lucht-, zee- en wegtransport. Assemblage en testen duren ongeveer 7 werkdagen. De celvoorziening bepaalt de totale doorlooptijd: liggen de benodigde cellen op voorraad, dan gaan samples in 12–15 werkdagen de deur uit; moeten ze worden ingekocht, reken dan op 20–25. Geef uw streefdatum vroeg door — wij bevestigen de celbeschikbaarheid voordat u zich vastlegt. Productie duurt 30–35 werkdagen. Er is geen minimale afname: we offreren losse stuks, met duidelijk betere prijzen vanaf 100 pakketten. De garantie op LiFePO4-pakketten is doorgaans 3–5 jaar, afgestemd op de ontlaadbelasting van de toepassing; hoge ontlaadstromen verkorten dit.

Ontvang een gratis offerte

Wij nemen binnen 8 uur contact met u op, let op de e-mail met het achtervoegsel “@holobatterij.com”.