Ultra Fast Charging For 36 Volt Lithium Batteries – this lithium charger is rated at 20 amps and will charge a 36V 60Ah battery in <3.5 hours or a 36V 100 Ah battery in <5.5 hours
Fully automatic four-stage charging with MCU control. Clear battery status display with four LED indicators (25% to 100%). Worldwide compatibility: 100-240V AC input.
| Rated Input Voltage | 100 Vac-240 Vac |
|---|---|
| Input Frequency | 47-63 Hz |
| Input Current | 11.5A MAX |
| Power Factor | ≥ 0.95 |
| Output Voltage | 12-90 V |
| Output Current | 0.1-55 A |
| Full Load Efficiency | ≥ 92 Input 230Vac @ Full load |
| Operating Temperature | – 20 ℃~40 ℃ |
| Storage Temperature | – 40 ℃~85 ℃ |
| Protection Functions | overcurrent, overvoltage, short-circuit, reverse polarity, anti-reverse current, and anti-spark |
| Certifications | CE, ROHS, FCC, KC, PSE, UKCA, GS, UL |
A 36V 20A charger for lithium and LiFePO4 packs, specified against the pack’s BMS rather than picked off a shelf. Charging profile, connector and cable length are set to the pack, so the charge curve matches the BMS thresholds instead of tripping them.
Key ratings: rated input voltage 100 Vac-240 Vac; output voltage 12-90 V; output current 0.1-55 A; full load efficiency ≥ 92 Input 230Vac @ Full load.
Output voltage and current, connector type, cable length and enclosure are all specified per project. Where the pack uses CAN or RS485, we can match the charger to the communication so charging stops on the BMS’s terms.
Can you match a charger to a pack we already have?
Yes. Send the pack’s voltage, capacity, charge current limit and BMS protocol and we specify to it.
Is the charger suitable for outdoor use?
Depends on the model and the enclosure specified. Tell us the exposure and we will confirm or design to it.
Chargers are built to the pack they serve: output voltage and current are set to your cell configuration, and where the pack uses CAN or RS485 we match the charger so charging stops on the BMS’s terms. Certification follows the requirement — where the charger has to carry UL approval we build to it; tell us at enquiry stage which approvals your market needs. Assembly and testing take around 7 working days. Samples ship in 12–15 working days when the housing and connector are standard; allow 20–25 if either is custom. Production runs 30–35 working days. There is no minimum order quantity — we quote single units, with pricing improving noticeably from 100 units upward. Warranty runs 1–3 years, set case by case: duty cycle is the limiting factor, since a charger running high currents ages with the pack it serves rather than outlasting it, and where unit price is the priority the standard term is 1 year.
China Premier Custom Battery Pack Manufacturer. Grade A Cell Solutions with Up to 450Wh/kg Capacity.
We will contact you within 8 hours, please pay attention to the email with the suffix “@holobattery.com”.
