Key Takeaways:
- C rate measures battery speed: 1C delivers full power in an hour.
- Higher C rates may incur energy loss as heat.
- Calculate C rate using t = 1 / Cr; adjust for charging/discharging time.
- High C rates are vital for power-hungry applications like drones and jump starters.
Batteries have something called a “C rate.” It tells us how fast they can charge or give out power. Let’s break it down.
What is a C Rate?
Think of C rate as the speed at which a battery works. A 1C rate means the battery can give all its power in one hour. A 0.5C rate? That’s slower, giving half the power in two hours.
Battery C Rate Chart
The chart below shows different battery C rates along with their service times. It is essential to note that discharging a battery at various C rates may result in some internal energy losses. At higher C rates, some energy can be lost as heat, reducing capacity by 5% or more.
| C Rating | Time |
| 0.05C or C/20 | 20 hours |
| 0.1C or C/10 | 10 hours |
| 0.2C or C/5 | 5 hours |
| 0.5C or C/2 | 2 hours |
| 1C | 1 hour |
| 2C | 30 minutes |
| 5C | 12 minutes |
| 10C | 6 minutes |
| 20C | 3 minutes |
| 30C | 2 minutes |
To get an accurate capacity reading, manufacturers often rate alkaline and lead-acid batteries at a very low 0.05C, or a 20-hour discharge.
Even at this slow discharge rate, lead-acid batteries seldom achieve 100% capacity as they are often overrated. Manufacturers provide capacity offsets to adjust for discrepancies if discharged at higher C rates than specified.
How to Calculate C Rating of a Battery
A battery’s C rating is determined by the time required for it to charge or discharge. Adjusting the C rate will affect the time required for charging or discharging. The calculation is straightforward:
- t = Time
- Cr = C Rate
Formulas:
- t = 1 / Cr (in hours)
- t = 60 minutes / Cr (in minutes)
0.5C Rate Example
- 2500mAh Battery
- 2500mAh / 1000 = 2.5Ah
- 0.5C x 2.5Ah = 1.25 Amps available
- 1 / 0.5C = 2 hours
- 60 / 0.5C = 120 minutes
2C Rate Example
- 2500mAh Battery
- 2500mAh / 1000 = 2.5Ah
- 2C x 2.5Ah = 5 Amps available
- 1 / 2C = 0.5 hours
- 60 / 2C = 30 minutes
30C Rate Example
- 2500mAh Battery
- 2500mAh / 1000 = 2.5Ah
- 30C x 2.5Ah = 75 Amps available
- 60 / 30C = 2 minutes
Finding C Rating of a Battery
Smaller batteries commonly have a 1C rating, also known as the one-hour rate. For instance, a battery labeled 3000mAh at the one-hour rate has a 1C rating of 3000mAh.
Typically, the C rate is found on the battery label and datasheet. Different battery chemistries may have varying C rates.
Lead-acid batteries often have low discharge rates like 0.05C or 20-hour rates, while lithium batteries can handle much higher C rates.
If the C rating is not found on the label or datasheet, it is advisable to contact the manufacturer directly.
Applications Requiring High C Rates
Many modern applications and devices demand high C rate batteries, including RC models, drones, robotics, and vehicle jump starters. Such applications require powerful energy bursts in short periods. In our own builds, high-discharge drone packs are sized for the C-rate of the climb peak, and AGV and mobile robot batteries for lift-motor bursts without voltage sag.
For instance, most jump starters may need up to an 80C rate discharge, and in the RC industry, high-rate discharge batteries are used up to 50C rates.
Some batteries claim even higher C rates for maximum pulse discharge, reaching full discharge in seconds. However, most applications do not need such extreme C rates.
Conclusion
Knowing the C rate helps you pick the right battery. It’s like choosing between a race car and a bike – both are good, but for different things. If you’re not sure which battery to choose, please contact Holo Battery engineering team.
Related Articles:




