Custom 12V 22Ah 1800 CCA Starting Lithium Battery

This 12.8V 22Ah LiFePO4 Battery Pack delivers impressive starting performance with 1800 Cold Cranking Amps (CCA) for cars and marine use. Its compact, lightweight design enhances vehicle efficiency and performance.

Key SpecificationsFactory Calibration Parameters

Additional information

Weight4.3 kg
Nominal Voltage

12.8V

Capacity

22Ah

Energy

282 Wh

Battery Type

Li-ion Prismatic

Max Continuous Discharge Current

350A

Charging Current

132A

Dimensions

165 x 126 x 175 mm

Charging Temperature

0~55°C

Discharging Temperature

-20~75°C

Storage Temperature

0~35°C

Product Details

A 12.8V 22Ah LiFePO4 starting battery for engine cranking and start-stop duty, replacing lead-acid in a smaller, lighter envelope. It carries 282 Wh of usable energy and delivers 350A continuous — a full 15.91C draw, with headroom for the surge loads motive duty demands.

Charging at 132A brings it to full in roughly 1 hours. The operating window is -20~75°C on discharge and 0~55°C on charge. The pack measures 165 x 126 x 175 mm and weighs 4.3 kg.

Where it sits in the range

Within our 12V range this sits between the 20Ah and 30Ah builds. If your runtime target is tighter than expected once we model the duty cycle, the 30Ah configuration is the usual next step; if weight or envelope is the binding constraint, the 20Ah build is lighter.

What we customise

Case format, terminal position and polarity, cranking rating and cold-weather behaviour are specified per platform. BMS communication over CAN or RS485 is available where the vehicle expects it, with Bluetooth for diagnostics.

Common questions

Will it work with our existing alternator and charging system?
In most cases, but voltage regulation matters. Send the charging voltage range and we confirm compatibility.

What cranking current can you deliver?
Set by cell selection and pack design. Give us the required CCA and we specify to it.

OEM / ODM Custom Design

Need This Pack with Custom Voltage, BMS, or Enclosure?

Our engineering division designs bespoke battery packs with CANBUS, RS485, custom aluminum enclosures, and matched chargers.

Get A Free Quote

We will contact you within 8 hours, please pay attention to the email with the suffix “@holobattery.com”